Pigment yellow 83, transparency type and hemi-trans type, yellow HR02
P.Y.83 possesses excellent fastness properties, which make it almost universally applicable. It provides a reddish yellow hue, which is considerably more reddish than that of P.Y.13 and at the same time very strong. P.Y.83 is the standard pigment within the reddish yellow range. P.Y.83 shows good to very good resistance to most solvents which are typically found in application media. P.Y.83 shows excellent lightfastness, even in methylmethacrylate or unsaturated polyester cast resins. The pigment does not affect the hardening of the latter. P.Y.83 is also used to an appreciable extent in plastics. Because of its good solvent resistance, migration is no problem in plasticized PVC even at low pigment levels; it does not bleed or bloom.
| Quantity: | |
|---|---|
| HP YELLOW 1680 | ||
| C.I.PY83 | ||
| Chemical Composition: | ||
| Color Index: | Pigment Yellow 83 | |
| C.I.NO.: | 21108 | |
| Chemical Formula: | C36H32Cl4N6O8 | |
| CAS NO.: | 5567-15-7 | |
| EU NO.: | 226-939-8 | |
| Physical Properties: | ||
| Physical Form : | Yellow Powder | |
| Heat Resistance(º C): | 200 | |
| Density (g/cm3): | 1.5 | |
| Specific Surface(㎡/g): | 60 | |
| PH Value: | 6.5-7.5 | |
| Oil Absorption(ml/100g): | 50-60 | |
| Fastness Properties: | Full Color | Tint Color |
| Dispersibility: | Excellent | Excellent |
| Light Fastness: | 7 | 5~6 |
| Acid Resistance: | 4-5 | 4~5 |
| Alkali Resistance: | 5 | 4~5 |
| Weather Fastness: | 5 | 4~5 |
| Water Resistance: | 5 | 4~5 |
| Oil Resistance: | 5 | 4 |
Recommended Application：
coatings: architectural coatings, coil coatings, industrial paints, powder coatings, ,
plastics: PVC, rubber, PS, PP, PE, PU,
Printing inks: offset inks, water-based inks, solvent inks, UV inks, printing pastes
| HP YELLOW 1680 | ||
| C.I.PY83 | ||
| Chemical Composition: | ||
| Color Index: | Pigment Yellow 83 | |
| C.I.NO.: | 21108 | |
| Chemical Formula: | C36H32Cl4N6O8 | |
| CAS NO.: | 5567-15-7 | |
| EU NO.: | 226-939-8 | |
| Physical Properties: | ||
| Physical Form : | Yellow Powder | |
| Heat Resistance(º C): | 200 | |
| Density (g/cm3): | 1.5 | |
| Specific Surface(㎡/g): | 60 | |
| PH Value: | 6.5-7.5 | |
| Oil Absorption(ml/100g): | 50-60 | |
| Fastness Properties: | Full Color | Tint Color |
| Dispersibility: | Excellent | Excellent |
| Light Fastness: | 7 | 5~6 |
| Acid Resistance: | 4-5 | 4~5 |
| Alkali Resistance: | 5 | 4~5 |
| Weather Fastness: | 5 | 4~5 |
| Water Resistance: | 5 | 4~5 |
| Oil Resistance: | 5 | 4 |
Recommended Application：
coatings: architectural coatings, coil coatings, industrial paints, powder coatings, ,
plastics: PVC, rubber, PS, PP, PE, PU,
Printing inks: offset inks, water-based inks, solvent inks, UV inks, printing pastes
