Pigment red 48:2 for Plastics
P.R.48:2 is also used in plastics, where it affords good tinctorial strength. Such colorations are heat stable up to 230°C for 5 minutes, but higher temperatures shift the color towards bluer, duller shades. At higher temperature, on the other hand, more reduced colorations (1/9 SD) shift the shade to yellower and cleaner hues. P.R.48:2 is used to an appreciable extent in LDPE, in which it is more lightfast than corresponding P.R.48:1 samples: the difference is about 2 1/2 steps on the Blue Scale. Incorporated in plasticized PVC, P.R.48:2 is not entirely 2.7.2 BONA Pigment Lakes 327 bleed resistant. The pigment may be used in PP spin dyeing only if polymers with a low melting point are used. In order to ensure sufficient light fastness, the pigment is used to advantage in deep shades, i.e., at high concentration.
| Quantity: | |
|---|---|
| HP RED 23124 | |
| C.I.PR48:2 | |
| Chemical Composition: | |
| Color Index: | Pigment Red 48:2 |
| C.I.NO.: | 15865:2 |
| Chemical Formula: | C18H11ClN2O6SCa |
| CAS NO.: | 7023-61-2 |
| EU NO.: | 230-303-5 |
| Physical Properties: | |
| Physical Form : | Red Powder |
| Heat Resistance(º C): | 260 |
| Density (g/cm3): | 1.7 |
| Specific Surface(㎡/g): | 58 |
| PH Value: | 7.5-8.5 |
| Oil Absorption(ml/100g): | 65 |
| Fastness Properties: | |
| Dispersibility: | Excellent |
| Light Fastness: | 6 |
| Migration Resistance | 4 |
Recommended Application：
plastics: PVC, rubber, PS, PP, PE, PU, EVA, ABS
| HP RED 23124 | |
| C.I.PR48:2 | |
| Chemical Composition: | |
| Color Index: | Pigment Red 48:2 |
| C.I.NO.: | 15865:2 |
| Chemical Formula: | C18H11ClN2O6SCa |
| CAS NO.: | 7023-61-2 |
| EU NO.: | 230-303-5 |
| Physical Properties: | |
| Physical Form : | Red Powder |
| Heat Resistance(º C): | 260 |
| Density (g/cm3): | 1.7 |
| Specific Surface(㎡/g): | 58 |
| PH Value: | 7.5-8.5 |
| Oil Absorption(ml/100g): | 65 |
| Fastness Properties: | |
| Dispersibility: | Excellent |
| Light Fastness: | 6 |
| Migration Resistance | 4 |
Recommended Application：
plastics: PVC, rubber, PS, PP, PE, PU, EVA, ABS
