説明

Product Description – PY83

HP YELLOW 1680 (Pigment Yellow 83) transparency type and hemi-trans type, yellow HR02
It possesses excellent fastness properties, which make it almost universally applicable. It provides a reddish yellow hue, which is considerably more reddish than that of P.Y.13 and at the same time very strong. It is the standard pigment within the reddish yellow range. It shows good to very good resistance to most solvents which are typically found in application media. It shows excellent lightfastness, even in methylmethacrylate or unsaturated polyester cast resins. The pigment does not affect the hardening of the latter. It is also used to an appreciable extent in plastics. Because of its good solvent resistance, migration is no problem in plasticized PVC even at low pigment levels; it does not bleed or bloom.

推奨用途：

Coatings: architectural coatings, coil coatings, industrial paints, powder coatings,
plastics: PVC, rubber, PS, PP, PE, PU,
Printing inks: offset inks, water-based inks, solvent inks, UV inks, printing pastes

技術データ：

• Light fastness: Light fastness rating is assessed on 1 to 8 Blue Wool scale where 1 = ‘Poor’ and 8 = ‘Excellent’.
• Heat Stability : Heat stability values given indicate the maximum temperature at which the pigment can be stoved for 10 min. on the full shade and in reductions without undergoing any significant change in shade.
• Oil absorption: The oil absorption is determined on the basis of EN ISO 787-5 and given in g linseed oil per 100 gm. pigment.
• Solvent bleeding: The bleeding in solvents is tested using the powder grades and the visual rating given on 1 to 5 Grey scale
  ここで、1＝「出血多量」、5＝「出血なし」である。‘

免責事項 - 本データシートに記載されている情報は、当社の現在の知見に基づくものであり、当社製品およびその可能な用途に関する一般的な説明を意図したものです。様々な配合、製造および適用条件があるため、上記のデータはすべて加工業者の状況に合わせて調整する必要があります。特許権を含むいかなる責任も、この事実から個々のケースについて導き出されるものではありません。本製品に0.1μm未満の粒子が含まれている可能性は否定できません。本製品の使用者は、その特定の用途におけるスダルシャン製品の適合性を判断し、所有権および既存の法律や法規が遵守されていることを確認する責任を負います。.