Honor Pigments

PIGMENT YELLOW 17/ HP YELLOW 1314

PIGMENT YELLOW 17/ HP YELLOW 1314

C.I.NO.: PY17

Advantage:

Main Application Recommended: Plastics

Description

Product Description – PY17

HP YELLOW 1314 (PIGMENT YELLOW 17) is a bright greenish transparent yellow disazo pigment. It is extensively used in the plastics industry, although it blooms in plasticized PVC. It is recommended for rapid-processing PVC, polyolefins, polystyrene, and ABS with a processing temperature below 200°C. Additionally, it exhibits extremely good lightfastness in aromatic polyurethane foams and is also used for the coloration of rubber.

Recommended Application

Coatings: solvent based paints, water based paints, powder coatings
Plastics: PE, PVC, Rubber/ TPV, SBC, TPO, TPU
Printing inks: offset inks, solvent based inks, water based inks

Technical Data:

Product Information
Chemical Type Disazo CAS NO. 4531-49-1
C. I. Name Pigment Yellow 17 EINECS / ELINCS NO. 224-867-1
C. I. Constitution No. 21105 Chemical Formula C34H30Cl2N6O6
Technical Performance
Full Shade Tint
Weather Resistance 4~5 4 Heat Stability °C 200°C
Light Fastness 6~7 6
Physical Properties
Physical Form Powder Resistance to Acid 5
Specific Density (g/cm3): 1.85 ± 0.1 Resistance to Alkali 5
Specific Surface(㎡/g): 0.40 ± 0.1 Resistance to MEK 3~4
Oil Absorption 38 ± 10 Reistance to Toluene 3
pH Value 4.0 – 7.0 Migration resistance PVC 5
Volatile Matter 1% max Low warping applications Suitable
Packaging
25kgs/bag   300kgs/Pallet
Storage Shelf Life 5 years
Should be stored in cool, dry and ventilate place.
TRANSPORTATION
Avoid inversion, sunlight, moisture and crash. Avoid damage the package.
  • Light fastness: Light fastness rating is assessed on 1 to 8 Blue Wool scale where 1 = ‘Poor’ and 8 = ‘Excellent’.
  • Heat Stability : Heat stability values given indicate the maximum temperature at which the pigment can be stoved for 10 min. on the full shade and in reductions without undergoing any significant change in shade.
  • Oil absorption: The oil absorption is determined on the basis of EN ISO 787-5 and given in g linseed oil per 100 gm. pigment.
  • Solvent bleeding: The bleeding in solvents is tested using the powder grades and the visual rating given on 1 to 5 Grey scale
    where 1 = ‘Heavy bleeding’ and 5 = ‘No bleeding”

Disclaimer – The information given in this data sheet is based on the present state of our knowledge & is intended as a general description of our products & their possible applications. Due to the multitude of formulations, production & application conditions, all the above mentioned data have to be adjusted to the circumstances of the processor. No liabilities, including those for patent rights, can be derived from this fact for individual cases. It cannot be ruled out that this product contains particles < 0.1 μm. Any user of this product is responsible for determining the suitability of Sudarshan’s products for its particular application & to ensure that any proprietary rights & existing laws & legislation are observed.

Related products

Leave Your Message