C.I.NO: PY17
Ventaja:
Aplicación principal recomendada: Plásticos
HP YELLOW 1314 (PIGMENT YELLOW 17) is a bright greenish transparent yellow disazo pigment. It is extensively used in the plastics industry, although it blooms in plasticized PVC. It is recommended for rapid-processing PVC, polyolefins, polystyrene, and ABS with a processing temperature below 200°C. Additionally, it exhibits extremely good lightfastness in aromatic polyurethane foams and is also used for the coloration of rubber.
Coatings: solvent based paints, water based paints, powder coatings
Plásticos: PE, PVC, Caucho/ TPV, SBC, TPO, TPU
Tintas de impresión: tintas offset, tintas base disolvente, tintas base agua
| Información sobre el producto | ||||
| Tipo químico | Disazo | Nº CAS. | 4531-49-1 | |
| C. I. Nombre | Pigment Yellow 17 | EINECS / ELINCS NO. | 224-867-1 | |
| C. I. Constitución n. | 21105 | Fórmula química | C34H30Cl2N6O6 | |
| Rendimiento técnico | ||||
| Sombra completa | Tinte | |||
| Resistencia a la intemperie | 4~5 | 4 | Estabilidad térmica °C | 200°C |
| Solidez a la luz | 6~7 | 6 | ||
| Propiedades físicas | ||||
| Forma física | Polvo | Resistencia al ácido | 5 | |
| Densidad específica (g/cm3): | 1.85 ± 0.1 | Resistencia a los álcalis | 5 | |
| Superficie específica (㎡/g): | 0.40 ± 0.1 | Resistance to MEK | 3~4 | |
| Absorción de aceite | 38 ± 10 | Reistance to Toluene | 3 | |
| Valor pH | 4.0 – 7.0 | Resistencia a la migración PVC | 5 | |
| Materia volátil | 1% máx | Aplicaciones de bajo alabeo | Adecuado | |
| Embalaje | ||||
| 25kgs/bag 300kgs/Pallet | ||||
| Almacenamiento | Vida útil | 5 años | ||
| Debe almacenarse en un lugar fresco, seco y ventilado. | ||||
| TRANSPORTE | ||||
| Evite la inversión, la luz solar, la humedad y los golpes. Evite dañar el embalaje. | ||||
Disclaimer – The information given in this data sheet is based on the present state of our knowledge & is intended as a general description of our products & their possible applications. Due to the multitude of formulations, production & application conditions, all the above mentioned data have to be adjusted to the circumstances of the processor. No liabilities, including those for patent rights, can be derived from this fact for individual cases. It cannot be ruled out that this product contains particles < 0.1 μm. Any user of this product is responsible for determining the suitability of Honor Pigments’s products for its particular application & to ensure that any proprietary rights & existing laws & legislation are observed.
📩 Need more details?
Request TDS, SDS, or a free sample for testing.