Honor Pigments

PIGMENT RED 122/ HP RED 26120

PIGMENT RED 122/ HP RED 26120

C.I.NO.: PR122

Advantage: Yellowish, Transparancy

Main Application Recommended: Solvent based inks, Water based inks, Coatings

Description

Product Description – PR122

HP RED 26120 ( PIGMENT RED 122) shows excellent application properties in high grade printing inks. It offers a very clean bluish shade of red, which is usually referred to as pink or magenta. It possesses excellent fastness to migration and outstanding heat stability. Its main areas of application are in high grade paints, printing inks, and plastics.

Recommended Application

Coatings: solvent based paints, water based paints, industrial coatings, powder coatings, coil coatings, wood coatings
Plastics: PP, PE, PVC, PS/SAN, ABS, PC, POM, PA, PET, PBT, PMMA, Rubber/ TPV, SBC, TPO, TPU

Printing inks: offset inks, solvent based inks, water based inks

Technical Data:

Product Information
Chemical Type Quinacridone CAS NO. 980-26-7
C. I. Name Pigment Red 122 EINECS / ELINCS NO. 213-561-3
C. I. Constitution No. 73915 Chemical Formula C22H16N2O2
Technical Performance
Full Shade Tint
Weather Resistance 5 4 Heat Stability °C 280°C
Light Fastness 8 7
Physical Properties
Physical Form Powder Resistance to Acid 5
Specific Density (g/cm3): 1.50 ± 0.1 Resistance to Alkali 5
Specific Surface(㎡/g): 71 Migration resistance PVC 5
Oil Absorption 75 ± 10 Low warping applications Not suitable
pH Value 6.0-9.0
Volatile Matter 1% max
Packaging
10kgs/bag 400kgs/Pallet
Storage Shelf Life 5 years
Should be stored in cool, dry and ventilate place.
TRANSPORTATION
Avoid inversion, sunlight, moisture and crash. Avoid damage the package.
  • Light fastness: Light fastness rating is assessed on 1 to 8 Blue Wool scale where 1 = ‘Poor’ and 8 = ‘Excellent’.
  • Heat Stability : Heat stability values given indicate the maximum temperature at which the pigment can be stoved for 10 min. on the full shade and in reductions without undergoing any significant change in shade.
  • Oil absorption: The oil absorption is determined on the basis of EN ISO 787-5 and given in g linseed oil per 100 gm. pigment.
  • Solvent bleeding: The bleeding in solvents is tested using the powder grades and the visual rating given on 1 to 5 Grey scale
    where 1 = ‘Heavy bleeding’ and 5 = ‘No bleeding”

Disclaimer – The information given in this data sheet is based on the present state of our knowledge & is intended as a general description of our products & their possible applications. Due to the multitude of formulations, production & application conditions, all the above mentioned data have to be adjusted to the circumstances of the processor. No liabilities, including those for patent rights, can be derived from this fact for individual cases. It cannot be ruled out that this product contains particles < 0.1 μm. Any user of this product is responsible for determining the suitability of Sudarshan’s products for its particular application & to ensure that any proprietary rights & existing laws & legislation are observed.

Related products

Leave Your Message