C.I.NO.: PR48:2
Advantage: Good gloss, Low viscosity
Main Application Recommended: Solvent based inks
HP Red 2598 (Pigment Red 48:2) is a calcium lake pigment. Widely used in gravure printing inks, especially NC-based packaging inks, it enhances viscosity in water-based inks for smooth, consistent results. With high color strength, excellent dispersibility, and good solvent resistance (MEK rating 3-4), it is insoluble in water, non-flammable, and non-explosive. Ideal for offset, flexographic, and solvent-based inks, it delivers vivid colors for packaging, publications, and textiles.
Coatings: solvent based paints, water based paints, industrial coatings
Printing inks: offset inks, solvent based inks
| Product Information | ||||
| Chemical Type | Azo | CAS NO. | 7023-61-2 | |
| C. I. Name | Pigment Red 48:2 | EINECS / ELINCS NO. | 230-303-5 | |
| C. I. Constitution No. | 15865:2 | Chemical Formula | C18H11ClN2O6SCa | |
| Technical Performance | ||||
| Full Shade | Tint | |||
| Weather Resistance | 4-5 | 3 | Heat Stability °C | 220°C |
| Light Fastness | 7 | 6 | ||
| Physical Properties | ||||
| Physical Form | Powder | Resistance to Acid | 5 | |
| Specific Density (g/cm3): | 1.70 ± 0.1 | Resistance to Alkali | 3~4 | |
| Specific Surface(㎡/g): | 58 | |||
| Oil Absorption | 65 | |||
| pH Value | 6.5 -8.5 | |||
| Volatile Matter | 1% max | |||
| Packaging | ||||
| 25kgs/bag 400kgs/Pallet | ||||
| Storage | Shelf Life | 5 years | ||
| Should be stored in cool, dry and ventilate place. | ||||
| TRANSPORTATION | ||||
| Avoid inversion, sunlight, moisture and crash. Avoid damage the package. | ||||
Disclaimer – The information given in this data sheet is based on the present state of our knowledge & is intended as a general description of our products & their possible applications. Due to the multitude of formulations, production & application conditions, all the above mentioned data have to be adjusted to the circumstances of the processor. No liabilities, including those for patent rights, can be derived from this fact for individual cases. It cannot be ruled out that this product contains particles < 0.1 μm. Any user of this product is responsible for determining the suitability of Sudarshan’s products for its particular application & to ensure that any proprietary rights & existing laws & legislation are observed.