Honor Pigments

PIGMENT YELLOW 138/ HP YELLOW 1311

PIGMENT YELLOW 138/ HP YELLOW 1311

C.I.NO.: PY138

Advantage: opauqe

Main Application Recommended: Printing inks, Plastics

Description

Product Description – PY138

HP YELLOW 1311 (PIGMENT YELLOW 138) is quinophthalone pigments afford exceedingly lightfast and weather fast greenish yellow shadeswith good heat stability. It is entirely or at least largely re_x0002_sistant to a large number of organic solvents, such as alcohols, esters, ketones, and aliphatic as well as aromatic hydrocarbons. It is opauqe type mainly used in paints and in plastics.

Recommended Application

Coatings: solvent based paints, water based paints, industrial coatings, powder coatings, coil coatings, auto paints, wood coatings
Plastics: PP, PE, PVC, PS/SAN, ABS, PC, PA, PBT, Rubber/ TPV
Printing inks: offset inks, solvent based inks

Technical Data:

Product Information
Chemical Type Quinophthalone CAS NO. 30125-47-4
C. I. Name Pigment Yellow 138 EINECS / ELINCS NO. 250-063-5
C. I. Constitution No. 56300 Chemical Formula C26H6Cl8N2O4
Technical Performance
Full Shade Tint
Weather Resistance 5 5 Heat Stability °C 290°C
Light Fastness 8 8
Physical Properties
Physical Form Powder Resistance to Acid 5
Specific Density (g/cm3): 1.82 ± 0.1 Resistance to Alkali 5
Specific Surface(㎡/g): 24 Migration resistance PVC 5
Oil Absorption 35 ± 10 Low warping applications Suitable
pH Value 5.0 – 8.0
Volatile Matter 1% max
Packaging
10kgs/bag   400kgs/Pallet
Storage Shelf Life 5 years
Should be stored in cool, dry and ventilate place.
TRANSPORTATION
Avoid inversion, sunlight, moisture and crash. Avoid damage the package.
  • Light fastness: Light fastness rating is assessed on 1 to 8 Blue Wool scale where 1 = ‘Poor’ and 8 = ‘Excellent’.
  • Heat Stability : Heat stability values given indicate the maximum temperature at which the pigment can be stoved for 10 min. on the full shade and in reductions without undergoing any significant change in shade.
  • Oil absorption: The oil absorption is determined on the basis of EN ISO 787-5 and given in g linseed oil per 100 gm. pigment.
  • Solvent bleeding: The bleeding in solvents is tested using the powder grades and the visual rating given on 1 to 5 Grey scale
    where 1 = ‘Heavy bleeding’ and 5 = ‘No bleeding”

Disclaimer – The information given in this data sheet is based on the present state of our knowledge & is intended as a general description of our products & their possible applications. Due to the multitude of formulations, production & application conditions, all the above mentioned data have to be adjusted to the circumstances of the processor. No liabilities, including those for patent rights, can be derived from this fact for individual cases. It cannot be ruled out that this product contains particles < 0.1 μm. Any user of this product is responsible for determining the suitability of Sudarshan’s products for its particular application & to ensure that any proprietary rights & existing laws & legislation are observed.

Related products

Leave Your Message