Beschreibung

Product Description – PY83

HP YELLOW 1680 (Pigment Yellow 83) transparency type and hemi-trans type, yellow HR02
It possesses excellent fastness properties, which make it almost universally applicable. It provides a reddish yellow hue, which is considerably more reddish than that of P.Y.13 and at the same time very strong. It is the standard pigment within the reddish yellow range. It shows good to very good resistance to most solvents which are typically found in application media. It shows excellent lightfastness, even in methylmethacrylate or unsaturated polyester cast resins. The pigment does not affect the hardening of the latter. It is also used to an appreciable extent in plastics. Because of its good solvent resistance, migration is no problem in plasticized PVC even at low pigment levels; it does not bleed or bloom. HP YELLOW 1680 (Pigment Yellow 83) is characterized by its remarkable versatility and strong performance in various applications. This pigment ensures consistent coloration and stability across a range of mediums, reinforcing its status as a preferred choice for manufacturers. Furthermore, its compatibility with different formulations enhances its usability, making it an essential component in industries such as coatings, plastics, and inks. Its superior fastness properties not only ensure longevity but also maintain the integrity of the final product, even under challenging conditions.

Empfohlene Anwendung：

Coatings: architectural coatings, coil coatings, industrial paints, powder coatings,
plastics: PVC, rubber, PS, PP, PE, PU,
Printing inks: offset inks, wWWWater$1sed inks, solvent inks, UV inks, printing pastes

Technische Daten:

• Lichtechtheit: Die Lichtechtheit wird auf einer Skala von 1 bis 8 bewertet, wobei 1 = ‘schlecht’ und 8 = ‘ausgezeichnet’ ist.
• Hitzestabilität: Die angegebenen Werte für die Hitzestabilität geben die maximale Temperatur an, bei der das Pigment 10 Minuten lang im Vollton und in Abzügen eingebrannt werden kann, ohne dass sich der Farbton wesentlich verändert.
• Ölabsorption: Die Ölabsorption wird auf der Grundlage von EN ISO 787-5 bestimmt und in g Leinöl pro 100 g Pigment angegeben.
• Ausbluten in Lösungsmitteln: Das Ausbluten in Lösungsmitteln wird anhand der Pulversorten getestet und die visuelle Bewertung auf einer Grauskala von 1 bis 5 angegeben.
  wobei 1 = ‘starke Blutung’ und 5 = ‘keine Blutung”.”

Disclaimer – The information given in this data sheet is based on the present state of our knowledge & is intended as a general description of our products & their possible applications. Due to the multitude of formulations, production & application conditions, all the above mentioned data have to be adjusted to the circumstances of the processor. No liabilities, including those for patent rights, can be derived from this fact for individual cases. It cannot be ruled out that this product contains particles < 0.1 μm. Any user of this product is responsible for determining the suitability of Honor Pigments’s products for its particular application & to ensure that any proprietary rights & existing laws & legislation are observed.